Posts for: September, 2016
Durable as well as life-like, dental implants are by far the preferred method for replacing missing teeth. But they can be costly and, although not as much, so can traditional bridgework. Is there an effective but more affordable means to replace a few missing teeth?
There is: a removable partial denture (RPD). In fact, RPDs have always been the less expensive alternative to bridgework and implants. Today's RPDs are usually made of vitallium, a strong but lightweight metal alloy. Because of the metal's characteristics, we can create an appliance that precisely matches the contours of your gums, is thin and hardly noticeable. We anchor prosthetic (false) teeth made of porcelain, resins or plastics in acrylic or nylon that resembles gum tissue.
The most important aspect of an RPD is to design it to produce the least amount of movement in your mouth as you eat or speak. A good design will minimize pressure on both the underlying bone (which can accelerate bone loss) and on the remaining teeth that support the RPD. Although a little more costly, it may be advantageous to use a dental implant to stabilize a lower partial denture when no end tooth is available for support.
To get the most out of your RPD — and to prevent dental disease — it's important for you to practice diligent daily hygiene. RPD attachments can make remaining teeth more susceptible to plaque accumulation, a thin film of bacteria and food particles that can cause tooth decay and periodontal (gum) disease. To avoid this you should remove the RPD and thoroughly brush and floss your remaining teeth. You should clean the RPD every day with recommended cleansers. You should also take it out at night while you sleep to discourage further bacterial or fungal growth.
Besides daily care for your RPD and natural teeth, be sure to visit us for cleanings and checkups at least twice a year. Taking care of both your appliance and your mouth will help ensure your RPD serves you for many years to come.
If you would like more information on removable partial dentures or other restoration options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removable Partial Dentures: Still a Viable Tooth-Replacement Alternative.”
In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?
“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.
How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.
With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.
In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.
While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.
Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”
We've all done it — suddenly bit the inside of our mouth while chewing food. All too often our cheek, lip or tongue finds itself in the way of our teeth.
The small wound caused by these types of bites usually heals quickly. But it's also common for the natural swelling of these wounds to cause the skin to become prominent and thus more in the way when we eat. As a result we bite it again — and again. If bit a number of times, the old wound can form a bump made of tougher tissue.
Also known as a traumatic fibroma, this growth is made up of a protein called collagen that forms into strands of fibers, similar to scar tissue or a callous. As you continue to bite it, the fibers form a knot of tissue that becomes larger with each subsequent bite and re-healing.
Unlike malignant lesions that form relatively quickly, these types of lumps and bumps usually take time to form.Â They're not injurious to health, but they can be irritating and painful when you re-bite them. We can alleviate this aggravation, though, by simply removing them.
The procedure, requiring the skills of an oral surgeon, periodontist or a general dentist with surgical training, begins with numbing the area with a local anesthetic. The fibroma is then removed and the area closed with two or three small stitches. With the fibroma gone, the tissue surface once again becomes flat and smooth; it should only take a few days to a week to completely heal with mild pain medication like ibuprofen to control any discomfort.
Once removed, we would have the excised tissue biopsied for any malignant cells. This is nothing to cause concern: while the fibroma is more than likely harmless, it's standard procedure to biopsy any excised tissue.
The big benefit is that the aggravating lump or bump that's been causing all the trouble is no more. You'll be able to carry on normal mouth function without worrying about biting it again.
If you would like more information on minor mouth sores and wounds, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Common Lumps and Bumps in the Mouth.”